Double-sided adhesive tape without carrier (10010)
Product detailed description
Uses:
This product is specifically recommended for bonding and laminating diversified materials such as foams, plastics, textiles and metals in the automotive industry and plants laminating these materials.
Product:
Transfer acrylic double-sided adhesive tape without carrier
Benefits:
High initial adhesive strength. High adhesive cohesion and excellent resistance to ageing and UV radiation. High temperature resistance makes it very suitable for automotive interior fittings.
Technical data:
| Adhesive: | Acrylate system. |
| Carrier: | none |
| Cover: | Silicone paper |
| Total thickness: | approx. 0.16mm |
| Adhesive thickness: | ca 0.10mm |
| Temperature range: | -30°C to 120°C |
Recommended application temperature: 10°C to 30°C
Peel strength: ≥ 20 N/25mm according to DIN EN 1939
Shear strength: 500 g /625 mm2 according to DIN EN 1943
TEXIM ADHESIVE double-sided adhesive tapes are used for firm bonding of bonded substrates. Due to the different properties of the materials to be bonded, double-sided adhesive tapes are also produced with different types of adhesives and carriers. Please consult our technical sales department for a suitable selection of these tapes.
Instructions for use:
The surfaces to be bonded must be clean, dry and degreased. Simple degreasers such as cleaning petrol or isopropyl alcohol are most suitable. When applying the tape, the tape should be pressed into the surfaces of the bonded substrates over the entire area with a force of approx. 0.5 - 1 kg/cm². If the material has back pressure, e.g. when gluing boxes or packaging, it is highly advisable to remove the back pressure by a suitable means (e.g. breaking the edges and then applying pressure while the glue is flowing). For rubber-based adhesives this time is approx. 12 hours, for acrylic systems approx. 24 hours. Bonding should be carried out at room temperature and room humidity.
If the tapes have been stored at temperatures below 16 °C, they should be temperature acclimatised for a minimum of 8 hours in an environment that meets the bonding conditions. After the adhesive has set, the joint may be subjected to mechanical, chemical and thermal stresses up to the values specified in the technical data sheet. The safest method of bonding is to test the tape in several pieces according to the instructions described above before bonding large batches.
Be the first who will post an article to this item!